Diverse redox-active molecules bearing O-, S-, or Se-terminated tethers for attachment to silicon in studies of molecular information storage

A molecular approach to information storage employs redox-active molecules tethered to an electroactive surface. Attachment of the molecules to electroactive surfaces requires control over the nature of the tether (linker and surface attachment group). We have synthesized a collection of redox-active molecules bearing different linkers and surface anchor groups in free or protected form (hydroxy, mercapto, S-acetylthio, and Se-acetylseleno) for attachment to surfaces such as silicon, germanium, and gold. The molecules exhibit a number of cationic oxidation states, including one (ferrocene), two [zinc(II)porphyrin], three [cobalt(II)porphyrin], or four (lanthanide triple-decker sandwich compound). Electrochemical studies of monolayers of a variety of the redox-active molecules attached to Si(100) electrodes indicate that molecules exhibit a regular mode of attachment (via a Si-X bond, X = O, S, or Se), relatively homogeneous surface organization, and robust reversible electrochemical behavior. The acetyl protecting group undergoes cleavage during the surface deposition process, enabling attachment to silicon via thio or seleno groups without handling free thiols or selenols.     

Optimization of the Conditions for the Cr (III) Adsorption on Activated Carbon

In order to understand the patterns of the adsorption equilibrium of Cr (III) on activated carbon, the adsorption process was studied by two different ways: classical batch experiments on commercial Norit and Merck activated carbons and their oxidized forms in a wide range of pHs; and extended time-based tests at the same pH values on the same adsorbents. This approach allowed us to understand the role of texture, chemical carbon surface functionality and experimental conditions (initial pH of the solution, contact time and adsorbate/adsorbent ratio) on the effectiveness of Cr (III) removal. The adsorption process of Cr (III) at (24 ± 1^∘C) on Merck and Norit activated carbons and their oxidized forms were studied at pH values between 1.5 and 5 (either adjusted or buffered). Chromium concentration was fixed at 200 ppm. The carbon loading ranged from 1.2 to 20 g/l. The carbon/Cr (III) solution contact time was varied from 0.5–1 month to 5 months, to ensure that the saturation of the carbon level was reached. According to the data obtained, the presence of carboxylic groups on carbon surface seems to enhance Cr (III) uptake at initial pH of the solution in the range between 2 and 4. Depending on the nature of the adsorbent surface chemistry, the contact time to reach equilibrium may range from 3 to 5 months. There is an optimum carbon loading which limits the Cr (III) uptake/removal at given pH value. In order to understand the adsorption process, an ion exchange, surface complex and surface precipitation were considered. This paper was presented in the 5th Brazilian Meeting on Adsorption, held at Natal, Brazil, 18-21 July, 2004.     

Synthesis of novel silylated 1,2,4-triazin-5-ones

The reaction of various α-silyl-α-keto esters with thiosemicarbazide at 50 °C in ethyl acetate was found to give α-silyl-substituted thiosemicarbazone-acetic acid esters in good yield. These may then be converted to their corresponding silyl-substituted 1,2,4-triazin-5-ones by cyclization under basic conditions.     

Quantum transport in chains with noisy off-diagonal couplings

We present a model for conductivity and energy diffusion in a linear chain described by a quadratic Hamiltonian with Gaussian noise. We show that when the correlation matrix is diagonal, the noise-averaged Liouville-von Neumann equation governing the time evolution of the system reduces to the [Lindblad, Commun. Math. Phys. 48, 119 (1976)] equation with Hermitian Lindblad operators. We show that the noise-averaged density matrix for the system expectation values of the energy density and the number density satisfies discrete versions of the heat and diffusion equations. Transport coefficients are given in terms of model Hamiltonian parameters. We discuss conditions on the Hamiltonian under which the noise-averaged expectation value of the total energy remains constant. For chains placed between two heat reservoirs, the gradient of the energy density along the chain is linear.     

Bis[bis­(3‐phenyl­pyrazol‐1‐yl)­(pyrazol‐1‐yl)­methane]­copper(II) bis­(per­chlor­ate) acetonitrile disolvate

The title copper(II) complex, [Cu(C₂₂H₁₈N₆)₂](ClO₄)₂·2C₂H₃N, comprises two neutral substituted tris­(pyrazol‐1‐yl)­methane ligands bonded to a central Cu^II ion, which is positioned on a crystallographic inversion center. Six Cu—N bonds are arranged in a distorted octa­hedral fashion. The unsubstituted pyrazole rings on each ligand are oriented trans with respect to each other, inter­digitated with the two 3‐phenyl­pyrazole rings of the other ligand.     

Localization of a multiblock copolymer at a selective interface: scaling predictions and Monte Carlo verification

We investigate the localization of a hydrophobic-polar regular copolymer at a selective solvent-solvent interface with emphasis on the impact of block length M on the copolymer behavior. The considerations are based on simple scaling arguments and use the mapping of the problem onto a homopolymer adsorption problem. The resulting scaling relations treat the gyration radius of the copolymer chain perpendicular and parallel to the interface in terms of chain length N and block size M, as well as the selectivity parameter chi. The scaling relations differ for the case of weak and strong localization. In the strong localization limit a scaling relation for the lateral diffusion coefficient D( parallel) is also derived. We implement a dynamic off-lattice Monte Carlo model to verify these scaling predictions. For chain lengths in a wide range (32相似文献   

Structure and decompression melting of a novel, high-pressure nanoconfined 2-D ice

Molecular dynamics (MD) simulations of water confined in nanospaces between layers of talc (system composition Mg(3)Si(4)O(10)(OH)(2) + 2H(2)O) at 300 K and pressures of approximately 0.45 GPa show the presence of a novel 2-D ice structure, and the simulation results at lower pressures provide insight into the mechanisms of its decompression melting. Talc is hydrophobic at ambient pressure and temperature, but weak hydrogen bonding between the talc surface and the water molecules plays an important role in stabilizing the hydrated structure at high pressure. The simulation results suggest that experimentally accessible elevated pressures may cause formation of a wide range of previously unknown water structures in nanoconfinement. In the talc 2-D ice, each water molecule is coordinated by six O(b) atoms of one basal siloxane sheet and three water molecules. The water molecules are arranged in a buckled hexagonal array in the a-b crystallographic plane with two sublayers along [001]. Each H(2)O molecule has four H-bonds, accepting one from the talc OH group and one from another water molecule and donating one to an O(b) and one to another water molecule. In plan view, the molecules are arranged in six-member rings reflecting the substrate talc structure. Decompression melting occurs by migration of water molecules to interstitial sites in the centers of six-member rings and eventual formation of separate empty and water-filled regions.     

Express detection of nonylphenol in water samples by fluorescence polarization immunoassay

The development of express method for detection of endocrine-disrupting chemicals (EDC) such as alkylphenols is required for ecological monitoring. Several attempts have been made to produce antibodies against 4-nonylphenol (NP) in recent years. This work describes the production of new antibodies against NP and also summarizes the characterization of antibodies obtained earlier. Three approaches used to produce alkylphenol-specific antibodies are compared; these are based on: 1. omega-(4-hydroxyphenyl)nonanoic or omega-(4-hydroxyphenyl)heptanoic acid NP derivatives designed to mimic the linear NP isomer; 2. 4-aminophenol, which potentially mimics various substituted phenolic compounds with different side-chain structures at position 4 of the benzene ring; and 3. a mixture of branched NP isomers, conjugated to the carrier protein via a benzene ring by the Mannich reaction, and expected to be the closest mimic of NP structure by preserving its natural alkyl moiety.Fluorescence polarization immunoassays based on different combinations of antibody and labeled antigen for screening detection of NP were developed and structural aspects of assay sensitivity and specificity were investigated. The assays based on the antisera raised against omega-(4-hydroxyphenyl)nonanoic acid and NP conjugate via Mannich reaction are capable of express detection of NP with detection limit of 7 microg mL(-1 )and assay dynamic range of 18-300 microg mL(-1).     

Interplay between Auger and ionization processes in nanocrystal quantum dots

We study the interplay between Auger effects and ionization processes in the limit of strong electronic confinement in core/shell CdSe/ZnS semiconductor nanocrystal quantum dots. Spectrally resolved fluorescence decay measurements reveal a monotonic increase of the photoluminescence decay rate on excitation density. Our results suggest that Auger recombination accelerates ionization processes that lead to the occupation of dark, nonemissive nanocrystal states. A model is proposed in the quantized Auger regime describing these experimental observations and providing an estimate of the Auger assisted ionization rates.     

7-(2-Methoxycarbonylvinyl)-3-hydroxychromones: new dyes with red shifted dual emission

7-(2-Methoxycarbonylvinyl)-3-hydroxychromones have been synthesized using Heck coupling reaction from the corresponding 7-bromo-3-hydroxychromones. Introduction of the electron acceptor (2-methoxycarbonylvinyl) group at 7-position of 3-hydroxychromone results in a 30-40 nm red shift in absorption and >50 nm red shifts of both bands in emission. This derivatization allowed us to develop dyes with absorption maxima reaching 480 nm and dual emission in the red region of the spectrum. In comparison to the parent dyes, 7-acryl-3-hydroxychromones demonstrate significantly stronger solvatochromism. This is due to the acceptor group at 7-position, which increases the transfer character of the excited state of the dyes. The new dyes are highly prospective for the development of new fluorescent probes in biological research.